Solar
Accessories
Every part.
Genuine brands.
MC4 connectors, Terrasun PV cables, Suntree fuses & breakers, EPEVER charge controllers, aluminium mounting structures, HOBER DC pumps, changeover switches & solar lights. Genuine brands. Expert advice. Same-day dispatch in Nairobi.
Industry-standard IP67 waterproof MC4 connector pair (male + female) for joining solar panel strings. Quick snap-lock, tool-free coupling.
4mm² single-core photovoltaic solar cable. Black & red available. Rated EN 50618 / IEC 62930. Sold per metre or roll.
6mm² PV cable for longer string runs and higher-current 400W–600W panels. Handles ~53A in free air. Black & red. Sold per metre or roll.
DC Type II surge protective device. Protects your inverter and panels from lightning-induced voltage surges. 2-pole for single-string systems.
3-pole DC SPD for larger multi-string or three-phase inverter systems. Higher protection for commercial solar arrays with multiple strings.
DC-rated MCCB for PV overcurrent and short-circuit protection. Critical: never use an AC breaker on a DC solar circuit — it cannot safely interrupt DC current.
Second MCCB model in the Suntree DC range. Alternative ampere rating or form factor for different system sizes. Contact us with your system DC current to confirm the right model.
NH1 fuse holder for lithium and lead-acid battery bank protection. Easy cartridge replacement without rewiring. Rated up to 250A.
NH1 cartridge fuse for the Suntree NH1 holder. Provides overcurrent protection for battery cables. Available in multiple amperages — specify your system current when ordering.
Smaller NH00 format fuse for lower-current battery protection or space-constrained enclosures. Typical rating up to 100A. Used in compact hybrid inverter installations.
PV combiner box for consolidating multiple solar panel strings into one DC output. Includes individual fuse slots for per-string protection, SPD provision, and main DC output terminals. Essential for any array with 2 or more parallel strings — prevents reverse current damage and provides organised, safe wiring.
4-pole DC isolator rated to 1000VDC. Safely disconnects the PV array from the inverter for maintenance or emergencies. Lockable handle prevents accidental re-energisation. A compliance requirement in any properly designed solar installation.
DIN rail mounted DC disconnect for neat integration in switchboards or enclosure panels. Space-saving design for compact installations. DC-rated — not an AC breaker repurposed for DC use.
PWM controller for small 12V/24V systems up to ~400W. LCD display, load output, battery type selection. Cost-effective for basic off-grid applications.
60A PWM for medium off-grid systems. Up to 800W on 12V, 1,600W on 24V. Temperature compensation, load output, dual-battery support.
PWM controller optimised specifically for 48V battery banks. 60A output, LCD, dual-battery charging option. Cost-effective for 48V off-grid systems not requiring MPPT efficiency.
Kenya's best-selling EPEVER TRACER. Up to 30% more efficient than PWM. 60A, ~2,400W at 24V. MT50 remote meter compatible. RS485. Recommended for all Deye and TBB hybrid inverter installations.
80A MPPT TRACER for large residential or small commercial systems. Handles ~3,840W on 48V. RS485 communication for PC monitoring. Suitable for farm, school, and office installations.
100A — highest output in the EPEVER TRACER range. Up to ~4,800W on 48V. For large commercial, hospitals, schools and farms needing maximum solar energy harvest.
The Felicity 30 Amps MPPT Charge Controller is designed to optimize solar energy harvesting by intelligently tracking the maximum power point of your solar panels. Compared to traditional controllers, MPPT technology significantly improves charging efficiency, ensuring your batteries receive more power throughout the days.
The Felicity 45 Amps Charge Controller is designed to deliver stable and efficient power regulation for solar systems with higher energy demands. With its 45A capacity, it is ideal for medium to large residential setups, small businesses, and off-grid applications that require reliable battery charging.
The Felicity 120 Amps MPPT Charge Controller is built for large-scale solar installations that demand maximum power handling and efficiency. With its impressive 120A capacity, it is ideal for commercial buildings, institutions, farms, and advanced off-grid systems with high energy consumption.
4.8 metre anodised aluminium mounting rail. The structural backbone of every rooftop installation. Corrosion-proof for Kenya's climate. Fits 2–3 standard panels per rail.
Internal splice bar for joining two aluminium rails end-to-end. Creates a flush, aligned joint for longer panel rows without gaps or misalignment.
Short mini rails for compact mounting configurations — 1–2 panel systems, portrait orientation installs, or where a full 4.8m rail is excessive.
Standard solar mounting rail (mounting kit range). Compatible with all standard mid and end clamps. Contact us for exact length for your panel model.
Long L-foot bracket providing greater clearance between roof surface and rail. Better ventilation under panels. Recommended for IBR and corrugated iron roofs on steel or timber purlins.
Short L-foot bracket for low-pitch or flat roof installations. Lower profile. Used on flat IBR or concrete slab installations where minimal panel clearance is acceptable.
Mid clamp secures two adjacent solar panels to the mounting rail. Fits panel frame thickness 30–50mm. Stainless steel hardware included. 1 clamp per pair of adjacent panels.
End clamp for securing the outermost panel on each row. Used at the start and end of every row — 2 end clamps per row. Stainless steel hardware included.
Hook that slides under individual concrete roof tiles and sits on the roof batten. No tile drilling or removal required. Creates a secure, watertight mounting point for L-feet and rails.
Hanger bolt for fixing L-feet to steel roof purlins (Z or C-section). Self-tapping thread bites into steel. Wood-screw end holds the L-foot plate. Pair with long L-feet.
Hanger bolt for fixing L-feet to timber roof rafters or battens. Wood-screw thread grips timber securely. Creates a strong, weather-resistant mounting point for the rail system.
Aluminium earthing lug for bonding panel frames and mounting rails to the earth stake cable. Mandatory for lightning protection compliance and system safety in Kenya.
Serrated earthing clip bites through the panel frame's anodised coating to create a reliable, low-resistance earth bond between panel and rail — without drilling, scraping, or extra tools. One clip per panel.
Complete aluminium mounting kit for 4 standard solar panels. Includes all rails, mid clamps, end clamps, L-feet, and hardware in one package — nothing else to source separately. Perfect for 1–2kW residential systems.
Complete long L-feet kit including L-feet, hanger bolts, nuts and washers. For IBR corrugated iron roofs on steel or timber purlins. Specify steel or timber hanger bolt when ordering.
200W DC pump for shallow wells and surface water pumping. Runs from 2 solar panels. Ideal for small gardens, livestock watering, and basic homestead domestic supply.
400W DC submersible for household borehole supply up to ~60m depth. Higher flow than 200W. Powered by 2–4 panels depending on DC voltage. No inverter required.
500W DC pump for medium farm irrigation and homestead borehole supply up to ~70m depth. Good flow for drip irrigation starter setups and small livestock operations.
600W DC pump — strong flow for farm irrigation, school water supply, and domestic borehole use. Pairs well with 4–6 panels for reliable daytime pumping to a storage tank.
750W — the most popular HOBER in Kenya. High flow from boreholes up to ~80m. Ideal for farms, schools, water kiosks, and community supply projects. Robust for daily high-demand use.
1100W DC pump for large farm irrigation, community water projects, and commercial borehole supply. Very high flow rate. Requires 1kW+ solar array for reliable full-speed operation.
Manual changeover switch for safely selecting between KPLC grid power, solar/inverter output, and generator power. Prevents two power sources from connecting simultaneously to your load. Prevents dangerous grid backfeed during KPLC outages. Available in various ampere ratings — specify your main circuit breaker amperage when ordering.
Complete all-in-one solar street light with integrated solar panel, LED lamp, lithium battery, and motion sensor. Automatic dusk-to-dawn operation. No wiring, no KPLC connection, no electricity bills. Pole-top installation. Perfect for estate roads, car parks, security perimeters, and rural paths.
200W solar LED flood light for security perimeters, warehouses, sports facilities, and large-area illumination. Integrated solar panel and battery. Motion-triggered or continuous mode. High-lumen output for effective coverage with zero KPLC connection.
Pre-matched to the most common Happy Solar system sizes. WhatsApp us to confirm or adjust for your specific installation — different panel models, roof types, or inverter configurations may need different quantities.
6mm² — for longer string runs up to 10–12m, or for high-current strings using modern 450W–600W panels where the cable carries more amperes per string.
10mm² — always use for the main DC trunk cable from your combiner box or charge controller into the inverter, especially on any system above 3kW. Undersizing this cable causes voltage drop and heat — both of which reduce your system's energy output and shorten component life. WhatsApp us with your system size and run length for a specific recommendation.
Always use MPPT for systems above 1kW, for lithium batteries (Weco, Pylontech, and similar), for modern 400W+ panels which have higher open-circuit voltages than older panels, and for all Deye and TBB hybrid inverter off-grid configurations. MPPT extracts up to 30% more energy from the same panels by continuously finding the optimal operating point. In Kenya's climate where cloud cover can cause frequent voltage drops, this efficiency advantage is especially valuable across the year.
Corrugated iron / IBR on steel purlins: Use long L-feet with steel hanger bolts — self-tapping into the steel purlin flange.
Corrugated iron / IBR on timber rafters: Use long L-feet with timber hanger bolts that grip the timber rafter.
Flat concrete slab: Use ballast mount frames anchored to the slab with chemical anchors or penetrating fasteners.
Not sure? WhatsApp us a photo of your roof — we will confirm exactly what mounting components you need and how many.
Not Sure What You Need?
We'll Tell You — Free.
WhatsApp us your inverter model, number of panels, and roof type. We will send you the complete accessory list with quantities and pricing. No charge, no obligation, no jargon.